Firmware Flashing Guide:

1.Get the bootstrap update application EdgeBootUpdate.exe ready from here . Make sure that the application is on your PC instead of the microSD. The easiest way is to place the file on your desktop.

2.Unzip the file downloaded (using Winrar) on your PC

• Unzip the files mentioned under the Software Preparation above, you will get:EdgeBootUpdate.exe

3.Run the EdgeBootUpdate.exe bootstrap update file and you can see the following window with the title iEDGE Boot Update. The application automatically identify your microSD memory card. In this example : it is at drive H:

4.Click Update to continue the flashing.

5.Reinsert the micro SDHC card into the computer. Under the root folder of the microSD, there is a new file generated from the flashing process mentioned above. A new file bupdate BIN file has been written to microSD root folder.

If you can’t see the BIN file, it is because the file is hidden. You need to enable the Visibility of the Hidden Files. For guides on how to activate the Visibility of the Hidden Files, please refer to below :

• Double-click on thethe microSD root folder
• Select the Tools menu and click Folder Options
• After the new window appears select the Viewtab.
• Put a checkmark in the checkbox labeled Display the contents of system folders.
• Under the Hidden files and folders section select the radio button labeled Show hidden files and folders.
• Remove the checkmark from the checkbox labeled Hide file extensions for known file types.
• Remove the checkmark from the checkbox labeled Hide protected operating system files.
• Press the Apply button and then the OK button and shutdown My Computer.
• Now your computer is configured to show all hidden files.

Important: bupdate BIN file is required for updating the iEDGE cart on the DS in the next step.

6.If you can't see the “bupdate BIN” file after enabling the Visibility of the Hidden Files, please restart from Format the Micro SD/SDHC Card.

7.Plug in the wall power adapter for your DSi. This is vital as flashing can't be interrupted. Do not turn on the DSi yet.

8.Plug in the microSD to the iEDGE and then the iEDGE into the slot-1 of the DSi.

Look at the iEDGE in the slot-1. The LED light inside the iEDGE should be visible as below (orange).

If the bootstrap flashing functions correct, the LED light should flash on and off.If the LED light is constantly on, that means that flashing does not function correct. Please restart the process from Format the Micro SD/SDHC Card.

The flashing will intensify slowly and the LED light will be off when the flashing is completed.

9.Plug in the iEDGE to the DSi and check if you can see the following icon on the DSi menu. If you can, congratulation! You have successfully flashed the iEDEG, the most difficult part of the whole process.

iEDGE Driver Setup Guide

1.Unzip the file | iEDGE Firmware downloaded  (using Winrar) on your PC

a. Winrar can be downloaded from www.download.com by searching for Winrar at the Search.
b. Unzip the files mentioned under the Software Preparation above, you will get:

2.Select all the above three unzipped files and copy them to the microSD memory card

3.Copy your own files, including music, movies, pictures and other data to the Micro SD/SDHC memory card.

4.Plug in the microSD to the R4i SDHC.When inserting or changing carts on slot-1, switch off the DS, insert in the cart and then start the DS.

5.First you will see the WARNING – HEALTH AND SAFETY, please touch the touch screen or press button A to continue.

6.For DSi or DSi XL, screen will be changed to the following icon. Please touch the icon to continue and press the button A to continue.

7.Then you will get the following Booting Screen which will last for several seconds.

8.Congratulation if you have come this far as you have successfully set up your iEDGE. There you go. Enjoy your DS with the multimedia functions.